Sharp MD-C2H - Manual (Page 25)

(Continued)
■ EON-PTY
1
Tune in the desired RDS station (when a station name is
being displayed).
2
Press the EON button when "EON" appears.
● "PTY TI" and "SELECT" will appear alternately for about 6
seconds.
3
Whilst they are being displayed, select the desired programme
type turning the jog dial.
● The selected programme type will flash.
4
Within 4 seconds, press the PTY.TI SEARCH button.
● The selected programme type and "WAITING" will be displayed
for 2 seconds each.
● "PTY" will appear, and the unit will enter the EON-PTY stand-
by mode.
5
When a programme of the type specified starts on an ON
(other network) station, the unit will automatically switch to
the station broadcasting the selected programme type, and
"PTY" will flash.
6
When the programme specified for the ON station is over,
the unit will automatically return to the original station you
were tuned to.
Note:
● If the EON button is pressed when "EON" is not displayed,
"NO EON" will appear for 5 seconds to indicate that the unit
cannot enter the EON stand-by mode.
Checking the stand-by mode setting:
When in the EON stand-by mode, press the EON button.
("Programme type"
→
"WAITING")
To cancel the EON stand-by mode:
When in the EON stand-by mode, press the EON button. Within
4 seconds, press it again. The EON stand-by mode will be can-
celled.
● "PTY" will go out.
DISPLAY
MODE
2
4
3
1
2
3
4
5
About the PTYI (Dynamic PTY Indicator):
PTYI (Dynamic PTY Indicator) will appear whilst the Dynamic PTY
station is being received.
Dynamic PTY indicates that the PTY for the station tuned in, or
the PTY referenced in the EON data, is assessed whenever the
programme changes and may be changed.
PTYI Meaning
Lights up Tuned into a dynamic PTY station.
Goes out Tuned into a static PTY.
Note:
● When "PTYI" appears, if you press the DISPLAY MODE button
to display the programme type, you can check the type of pro-
gramme you are actually receiving.
(Main unit operation)
MD-C2H(SUK) TINSE0238AWZZ
24