Sharp MD-C2H - Manual (Page 31)

HK
(Continued)
■
Switching the MD time display
Each time the MD TIME button is pressed during playback or
when in the pause mode, the display will change as described
below.
● The information displayed will relate to the MD whose red
frame is flashing.
MD TIME
1
2
3
DISPLAY
1
2
3
1
2
See the diagram to the left
1
The elapsed playing time for each track will be displayed.
2
The remaining playing time for the current track will be dis-
played.
3
The total remaining playing time for the disc from the point
being played at that time will be displayed.
Notes:
● During random play, the total remaining playing time will not
be displayed.
● Depending on a MD to be played, the playing time display
may not match the total playing time which is indicated on
the MD jacket, as the time between the tracks is not included.
● During playback, the elapsed time and the remaining playing
time for the current track may be different from the actual
time measured on a clock.
■
Changing the display during MD playback
Each time the DISPLAY button is pressed during playback or
when in the pause mode, the display will change as described
below.
● The information displayed will relate to the MD whose red
frame is flashing.
When the MD has a track name:
1
The track name will be displayed.
2
The total number of tracks and the remaining recording time
will be displayed.
3
The elapsed playing time will be displayed.
When the MD does not have a track name:
1
The total number of tracks and the remaining recording time
will be displayed.
2
The elapsed playing time will be displayed.
When the MD has a track name
Elapsed playing time
When the MD does not have a track name
Elapsed playing time
(Remote control operation)
(Main unit operation)
MD-C2H(SUK) TINSE0238AWZZ
30