Sharp MD-C2H - Manual (Page 18)

RDS (Radio Data System) OPERATION
RDS is a broadcasting service which a growing number of FM stations are now providing. It allows these FM stations to
send additional signals along with their regular programme signals. For example, the stations send their station names, and
information about what type of programme they broadcast, such as sports or music, etc.
When tuned to an FM station which provide the RDS service, the RDS will appear, the station frequency (and then the
station name if sent) is displayed.
The TP (Traffic Programme) will appear on the display when the received broadcast carries traffic announcements, and the
TA (Traffic Announcement) will appear whilst a traffic announcement is being received.
EON will appear whilst the EON (Enhanced Other Networks information) data is being broadcast.
The PTYI (Dynamic PTY Indicator) will appear whilst the Dynamic PTY station is being received.
Note:
When the TP and TA appear at the same time, an announcement is being made.
When only the TA appears, an announcement is not being made. (See page 25.)
■
Information Provided by RDS
With the MD-C2H, you can display three types of RDS service.
To show them in the display, press the DISPLAY MODE button.
Each time you press the DISPLAY MODE button, the display will
change to show the following information.
PS (Programme Service): Station names commonly
known will be displayed.
"NO PS" appears if no signal
is being received.
PTY (Programme Type): Programme type will be dis-
played.
"NO PTY" appears if no sig-
nal is being received.
RT (Radio Text): Radio text will be displayed.
"NO RT" appears if no signal
is being received.
Station Frequency: Station frequencies.
DISPLAY
MODE
MD-C2H(SUK) TINSE0238AWZZ
17