Sharp MD-C2H User Manual

Page 39

(Continued)

■

Divide

ENTER

NAME/
TOC EDIT

Before making editing changes, check the disc number.

Play the track which you want to divide into two, and press
the

0 6

button at the point where you want to divide the

track.

●

The unit will enter the pause mode.

Press the NAME/TOC EDIT button, and within 10 seconds,
select "DIVIDE" using the jog dial.

Within 10 seconds, press the ENTER button.

●

To cancel the operation, press the

■

button.

Press the ENTER button again.

●

The track is divided, and the unit is stopped at the beginning
of the second of the two tracks.

●

The numbers of the tracks which come after the divided track
are automatically increased by one.

Notes:

●

When a track which has been given a name is divided, the two
new tracks will have the same name. If the "TOC FULL

∗

message is seen, the second track may not be given a name.
(Page 50)

●

This unit can hold up to 255 tracks. However, even if the num-
ber of tracks assigned has not reached 255, it might not be
possible to make any further divisions of tracks. (Page 50)

●

This function cannot be used whilst a programme is being en-
tered ("MEMORY" is lit: Page 29) or whilst in the random play
mode ("RANDOM" is lit: Page 28). First, cancel the programme
or random play mode before trying to use this function.

■

Combine

Before making editing changes, check the disc number.

Whilst in the stop mode, select the second of the two adjacent
tracks you want to combine using the jog dial.
Or start playing the second of the two tracks you want to
combine, and then press the

0 6

button to enter the pause

mode.

Press the NAME/TOC EDIT button, and within 10 seconds,
select "COMBINE" using the jog dial.

Within 10 seconds, press the ENTER button.

●

To cancel the operation, press the

■

button.

Press the ENTER button again.

●

The two tracks are combined, and the unit is stopped at the
beginning of the combined track.

●

The numbers assigned to the tracks following the combined
track are automatically decreased by one.

When both tracks have a name:

●

When only the first track has a name

→

That name

will be used.

●

When only the second of the two tracks has a name

→

That name will be used.

●

When both tracks have a name

→

The name of the

first track will be used.

To combine two non-contiguous tracks:

(Example: the first and third tracks)
Move the third track to the second track using the
MOVE function. (Page 39)
Then, combine the first and second tracks using the
COMBINE function.

Notes:

●

Tracks recorded from analogue inputs cannot be combined with
tracks recorded from CDs or MDs using the digital inputs.

●

Tracks recorded in the stereo mode cannot be combined with
tracks recorded in the monaural long-play mode.

●

Tracks where either track’s recording time is less than 15 sec-
onds may not be combined.

●

Jog dial

MD-C2H(SUK) TINSE0238AWZZ