Sharp MD-C2H User Manual
Page 34
(Continued)
■
APMS recording from CDs onto MiniDiscs
You can select your favourite tracks from CDs and record them
onto three consecutive MiniDiscs.
1
Select tracks for APMS playback. (Page 29)
2
Load recordable MiniDiscs.
3
Press the CD
0
MD EDIT button.
●
APMS playback will start, and recording will start on MD 1
automatically.
●
Programmed tracks will be recorded in order. After the unit
has finished recording the last track, recording will stop auto-
matically.
●
If a MiniDisc runs out of room whilst recording in the middle
of a CD track, the unit will automatically start recording from
the beginning of the track onto the next MD.
To stop recording:
Press the
■
button.
2
3
●
It is not possible to pause in the recording mode.
Note:
●
When repeat play or random play has been set, if you press
the CD
0
MD EDIT button, the play mode will be cancelled,
and APMS recording will start.
■
Recording from the built-in radio onto
MiniDiscs
When three MiniDiscs are loaded, you can make an extended
recording from MD 1 through MD 3.
1
Tune in to the desired station. (pages 15 - 16.)
2
Load recordable MiniDiscs.
3
Press the MD REC
●
button.
●
The unit will enter the recording stand-by mode.
Note:
●
Before recording an AM broadcast, enter the recording stand-
by mode, and then separate the AM loop aerial from the main
unit. Adjust it so that the AM broadcast can be tuned in most
clearly.
4
Check the recordable time by pressing the DISPLAY button.
5
Press the
0 6
button.
●
Recording will start from MD 1, and MD 2 and MD 3 will be
recorded in order.
When the available recording time on MD 3 is consumed, MD
3 will stop automatically.
●
During recording, you cannot change the station.
3
2
5
3
5
4
To record the track number whilst recording:
The recording is performed as a single track.
To identify different sections of a recording you can increase the
track number at any point during the recording process. To create
a new track number, whilst in the recording mode, press the MD
REC
●
button.
●
The track number will increase by one, and then the recording
will continue.
To stop recording:
Press the
■
button.
(Main unit operation)
MD-C2H(SUK) TINSE0238AWZZ
33