Sharp MD-C2H User Manual

Page 35

(Continued)

1 -

CD PLAY

TAPE

■

Recording from CDs or a cassette onto
MiniDiscs (Synchronised Recording System)

When a CD or a tape is played, the MD recording will start sim-
ultaneously.

Load CDs or a tape for playback.

Load recordable MiniDiscs.

Press the CD or TAPE button to select the desired function.

●

When recording from a CD, you can specify the CD track you
want to start recording from.
Select a disc using the CD PLAY button, and press the

■

button to stop the disc. Then, use the jog dial to select the
track.
(Continuous recording will start from the selected track.)

Press the MD REC

●

button.

●

"MD

●

" will flash, and the unit will enter the recording stand-by

mode.

●

To cancel the operation, press the

■

button.

Check the recordable time by pressing the DISPLAY button.

Press the

0 6

button.

●

When recording from a CD, continuous recording will start from
the CD whose red frame is flashing.

●

After the recording has finished, the CD or tape and the Mini-
Disc will stop automatically.

To specify the disc to start with and start recording:

①

Perform steps 1 - 3 above.

②

Press the CD PLAY 1

- 3

button whose number matches

the frame which is currently flashing.

③

Press the

■

button.

④

Press the MD REC

●

button, then the

0 6

button.

To stop recording:

Press the

■

button after pressing the

■

button.

●

It is not possible to pause in the recording mode.

Notes:

●

When recording from a CD, if a MiniDisc runs out of room
whilst recording in the middle of a CD track, the unit will auto-
matically start recording from the beginning of the track onto
the next MD.

●

When recording from a tape, if a MiniDisc runs out of room
whilst recording in the middle of a track, the unit will continue
recording on the next MD from the point where the track was
stopped.

Auto Mark function

If there is 1 second or more of silence, a new track number is
created automatically.

MD-C2H(SUK) TINSE0238AWZZ