Sharp MD-C2H - Manual (Page 12)

COMPACT DISC OPERATION
■
Loading and playing CDs
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the 7 OPEN/CLOSE button to open the disc tray.
4
Place the CD(s) on the disc tray, label side up.
● CDs can be placed on any open position on the disc tray.
● Be sure to place 8 cm (3") CD(s) in the middle of the disc
trays.
Caution:
Do not stack CDs in the tray.
This can damage the player and the CDs.
5
When loading a third disc, press the CD SKIP button to turn
the disc tray, then place the CD in the open position.
6
Press the 7 OPEN/CLOSE button to close the disc tray.
● The total number of tracks and the total playing time for one
disc will be displayed. At this time, the red frame that corre-
spouds to the selected disc will flash.
7
Press the 0 6 button.
● Playback will begin from track 1 on the disc whose disc frame
is flashing.
● After the disc finishes playing, the next disc will automatically
play.
● When there is no CD in one of the disc 1 - 3 positions, that
position will be skipped and the next CD will be played.
● When the last track on the third disc has finished playing, the
unit will stop automatically.
1 -
CD PLAY
3
1 -
CD PLAY
3
4
3,6 5
1
2
7
7
2
1
5
To select the disc to start with and have the unit per-
form continuous playback:
①
Press the CD PLAY 1 0 - 3 0 button whose number matches
the frame which is currently flashing.
②
Press the ■ button.
③
Press the 0 6 button.
● All three discs, starting from the selected disc, will be played
continuously.
To interrupt playback:
Press the 0 6 button.
● " 6 " will appear.
To resume continuous playback from the point where
playback was interrupted:
Press the 0 6 button again.
To stop playback:
Press the ■ button.
To remove the CDs:
Whilst in the stop mode, press the 7 OPEN/CLOSE button.
● The disc tray will open. Remove the two discs. Then, press
the CD SKIP button to rotate the disc tray and remove the
remaining disc.
After use:
Press the ON/STAND-BY button to enter the stand-by mode.
To select the next disc number:
①
When stopped, press the CD SKIP button.
②
Press the 0 6 button.
● Playback of the next disc will begin, after which each
following disc will be played sequentially.
Notes:
● When the CD SKIP button is pressed during playback, playback
will begin automatically from the next disc. (It is not necessary
to press the
0 6 button again.)
● When one of the CD PLAY 1 0 - 3 0 buttons is pressed
during playback, playback of the selected disc will begin auto-
matically.
(It is not necessary to press the
0 6 button again.)
12 cm (5")
8 cm (3")
The red frame that corre-
sponds to the selected CD
will flash.
Total number of tracks Total playing time
MD-C2H(SUK) TINSE0238AWZZ
11