Sharp MD-C2H User Manual
Page 15
HK
(Continued)
3
1
5
2
1
2
4
5
■
When choosing a MD for playback
Press one of the MD PLAY 1
0
- 3
0
buttons to select the MD
you want to listen to.
●
Only the selected disc will be played back.
When selecting
disc 1
When selecting
disc 2
When selecting
disc 3
Note:
●
If the
0 6
button is pressed, continuous playback will begin
from the first track of the disc you have selected.
1 -
MD PLAY
3
1 -
MD PLAY
3
To interrupt playback:
Press the
0 6
button.
To resume playback for just a single disc:
Press the MD PLAY 1
0
- 3
0
button whose number matches
the frame which is currently flashing.
CASSETTE OPERATION
■
Tape playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE button.
3
Open the cassette door by pushing the area marked "PUSH
EJECT".
4
Load a cassette into the cassette compartment.
5
Press the
0 6
button to start playback.
To stop playback:
Press the
■
button.
Fast forward/rewind:
①
Press the
■
button.
②
To advance the tape, press the
2
(
2 / 4
) button.
To rewind it, press the
3
(
3 / 5
) button.
Precautions:
●
When removing the cassette tape, press the
■
button, and
then open the cassette compartment.
●
Before changing from one tape operation to another, press
the
■
button.
●
If a power failure occurs during tape operation, the tape head
will remain engaged with the tape and the cassette door will
not open. If this occurs, wait until power is restored.
●
Even if the
0 6
button is pressed during tape playback, the
unit will not enter the pause mode.
MD-C2H(SUK) TINSE0238AWZZ
14