Sharp MD-C2H - Manual (Page 44)

(Continued)
■
To change disc names and track names
Before making editing changes, check the disc number.
1
To change disc names, perform steps 1 - 3 on page 41.
To change track names, perform steps 1 - 2 on page 42.
Example: To change "BESUT" to "BEST"
2
Press the 3 / 2 button to make the character you want to
erase begin flashing.
● To cancel the operation, press the ■ button.
3
Press the DELETE/CLEAR button.
● After this step, if you are not going to enter a character, go
to step 5.
4
Select the character you want to add, using the jog dial. Then,
press the ENTER button.
● The selected character will be added, and the original char-
acters will move to the right by one.
5
After entering all of the characters in the name, press the
NAME/TOC EDIT button.
To add a character:
1
To change disc names, perform steps 1 - 3 on page 41.
To change track names, perform steps 1 - 2 on page 42.
ENTER
NAME/
TOC EDIT
DELETE/
CLEAR
2
3
2
3
Example: To change "BET" to "BEST"
2
Press the 3 / 2 button to make the character at the place
you want to add a letter begin flashing.
● To cancel the operation, press the ■ button.
3
Select the character you want to add, using the jog dial. Then,
press the ENTER button.
● The selected character will be added, and the original char-
acters will move to the right by one.
4
After entering all of the characters in the name, press the
NAME/TOC EDIT button.
Note:
● You cannot modify 40 characters or more if they were entered
using some other equipment.
In this case, erase the name and then enter a new name.
Jog dial
MD-C2H(SUK) TINSE0238AWZZ
43