SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 278)

Command Line Interface
7-108
Default Setting
full
Command Mode
Interface Configuration (Wireless)
Command Usage
• The “min” keyword indicates minimum power.
• The longer the transmission distance, the higher the
transmission power required. Power selection is not just a
trade off between coverage area and maximum data rates.
You also have to ensure that high strength signals do not
interfere with the operation of other radio devices in your
area.
Example
max-association
This command configures the maximum number of clients that
can be associated with the access point at the same time.
Syntax
max-association <count>
count - Maximum number of associated stations.
(Range: 0-64)
Default Setting
64 (per radio)
Command Mode
Interface Configuration (Wireless)
AP(if-wireless a)#transmit-power half
AP(if-wireless a)#