SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 270)

Command Line Interface
7-100
Default Setting
None
Command Mode
Interface Configuration (Wireless)
Example
ssid
This command configures the service set identifier (SSID).
Syntax
ssid <string>
string - The name of a basic service set supported by the
access point. (Range: 1 - 32 characters)
Default Setting
SMC
Command Mode
Interface Configuration (Wireless)
Command Usage
Clients that want to connect to the wireless network via an
access point must set their SSIDs to the same as that of the
access point.
Example
AP(config)#interface wireless a
AP(if-wireless a)#description RD-AP#3
AP(if-wireless a)#
AP(if-wireless g)#ssid RD-AP#3
AP(if-wireless g)#