SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 190)

Command Line Interface
7-20
Example
password
After initially logging onto the system, you should set the
password. Remember to record it in a safe place. Use the no
form to reset the default password.
Syntax
password password
no password
password - Password for management access.
(Length: 3-16 characters, case sensitive)
Default Setting
smcadmin
Command Mode
Global Configuration
Example
ip http port
This command specifies the TCP port number used by the web
browser interface. Use the no form to use the default port.
Syntax
ip http port port-number
no ip http port
port-number - The TCP port to be used by the browser inter-
face. (Range: 1024-65535)
AP(config)#username bob
AP(config)#
AP(config)#password bridgelink
AP(config)#