SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 180)

Command Line Interface
7-10
The access mode shown in the following tables is indicated by
these abbreviations: GC (Global Configuration), IC-E (Ethernet
Interface Configuration), and IC-W (Wireless Interface
Configuration).
General Commands
configure
This command activates Global Configuration mode. You must
enter this mode to modify most of the settings on the wireless
bridge. You must also enter Global Configuration mode prior to
enabling the context modes for Interface Configuration. see
“Using the Command Line Interface” on page 7-1
Default Setting
None
IAPP Enables roaming between multi-vendor
access points 7-122
VLANs Configures VLAN support 7-123
Command Function Mode Page
configure Activates global configuration mode Exec 7-10
end Returns to the previous configuration
mode GC, IC 7-11
exit Returns to Exec mode, or exits the CLI any 7-11
ping Sends ICMP echo request packets to
another node on the network Exec 7-12
reset Restarts the system Exec 7-13
show history Shows the command history buffer Exec 7-14
show line Shows the configuration settings for the
console port Exec 7-14
Command
Group Description Page