SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 250)

Command Line Interface
7-80
show filters
This command shows the filter options and protocol entries in the
filter table.
Command Mode
Exec
Example
PPPoE Commands
The commands described in this section configure PPPoE
management tunnel connection parameters for the Ethernet port.
AP#show filters
Protocol Filter Information
=========================================================
AP Management :ENABLED
Ethernet Type Filter :ENABLED
Enabled Protocol Filters
---------------------------------------------------------
Protocol: ARP ISO: 0x0806
=========================================================
AP#
Command Function Mode Page
ip pppoe Enables PPPoE on the Ethernet
interface IC-E 7-81
pppoe ip allocation
mode Specifies how IP addresses for the
PPPoE tunnel are configured on the
interface IC-E 7-82
pppoe ipcp dns Negotiates DNS for the PPPoE
tunnel IC-E 7-83
pppoe lcp
echo-interval Sets LCP echo interval for the
PPPoE tunnel IC-E 7-84