SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 212)

Command Line Interface
7-42
• The destination file name should not contain slashes (\ or /),
the leading letter of the file name should not be a period (.),
and the maximum length for file names on the FTP/TFTP
server is 255 characters or 32 characters for files on the
wireless bridge. (Valid characters: A-Z, a-z, 0-9, “.”, “-”, “_”)
• Due to the size limit of the flash memory, the wireless bridge
supports only two operation code files.
• The system configuration file must be named “syscfg” in all
copy commands.
Example
The following example shows how to upload the configuration
settings to a file on the TFTP server:
The following example shows how to download a configuration
file:
delete
This command deletes a file or image.
Syntax
delete filename
filename - Name of the configuration file or image name.
AP#copy config tftp
TFTP Source file name:syscfg
TFTP Server IP:192.168.1.19
AP#
AP#copy tftp file
1. Application image
2. Config file
3. Boot block image
Select the type of download<1,2,3>: [1]:2
TFTP Source file name:syscfg
TFTP Server IP:192.168.1.19
AP#