Pppoe service-name, Pppoe restart, Pppoe service-name -89 pppoe restart -89 – SMC Networks ElliteConnect 2.4GHz/5GHz User Manual

Page 259

PPPoE Commands

7-89

pppoe service-name

This command sets the service name for the PPPoE tunnel.

Syntax

pppoe service-name <string>

string - Service name assigned by the service provider.
(Range: 1-63 alphanumeric characters)

Default Setting

None

Command Mode

Interface Configuration (Ethernet)

Command Usage

The service name is normally optional, but may be required by
some service providers.

Example

pppoe restart

This command restarts the PPPoE connection with updated
parameters.

Command Mode

Interface Configuration (Ethernet)

Command Usage

This command restarts PPPoE service using the most recently
configured parameters.

AP#(if-ethernet)#pppoe service-name classA
AP#