SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 267)

Wireless Interface Commands
7-97
Example
Wireless Interface Commands
The commands described in this section configure connection
parameters for the wireless interface.
AP#show interface ethernet
Ethernet Interface Information
========================================
IP Address : 192.168.2.2
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.253
Primary DNS : 192.168.1.55
Secondary DNS : 10.1.0.55
Admin status : Up
Operational status : Up
========================================
AP#
Command Function Mode Page
interface wireless Enters wireless interface
configuration mode
GC 7-99
description Adds a description to the wireless
interface IC-W 7-99
ssid Configures the service set identifier IC-W 7-104
closed system Prohibits access to clients without a
pre-configured SSID IC-W 7-101
speed Configures the maximum data rate
for transmitting unicast packets on
the wireless interface IC-W 7-101
channel Configures the radio channel IC-W 7-102
turbo Configures the 802.11a radio to use a
faster proprietary modulation mode IC-W 7-103
beacon-interval Configures the rate at which beacon
signals are transmitted from the
wireless bridge IC-W 7-104