Siemens M34 - Manual (Page 26)

26
Operating the Gigaset M34 software
Gigaset M34 USB Ya-LBA / englisch / A31008-M403-R101-4-7619 / Bedienen.fm / 10.04.2006
Operating the Gigaset M34 software
When started for the first time, the Gigaset M34 software is opened with the preset
view. This view is divided into the following sections:
u The menu tree shows all software components that have been installed with the
Gigaset M34 software. This is where you can select the component you want to use.
The components are sorted alphabetically in the menu tree. If you install additional
components, the sorting of the entries therefore changes.
u The working area shows the configuration dialog for the selected component.
This is where you configure the components and enter your data.
u As well as the Help for the Gigaset M34 software, the menu bar and the toolbar
contain all commands available for the relevant components.
Menu tree Working area Menu bar and toolbar
Gigaset M34 Software
M34 USB
-- Status
-- Configuration
-- Firmware update
File Edit entry Options Help