Siemens M34 User Manual

Page 25

Configuring the Gigaset M34 software

Gigaset M34 USB Ya-LBA / englisch / A31008-M403-R101-4-7619 / Konfigurieren.fm / 11.04.2006

Updating firmware

Close all running applications except the Gigaset M34 software.

Make sure that your Gigaset M34 USB PC adapter is directly connected to the PC.

Click on the Firmware update option in the menu tree. The button to start the
firmware update is shown in the working area.

Click on Start firmware update.
The Gigaset M34 software is closed. The Wizard for downloading new firmware
program is opened.

Click on Continue.
An Explorer window is opened.

Open the directory containing the current firmware (CD-ROM or firmware down-
loaded from the Internet, which must be unpacked).

Select the setup file (*.dat) for the firmware update.

Click on Open.
The version of the selected firmware is compared with the current version.

Click on Continue.
The firmware for your Gigaset M34 USB is updated.

After the firmware update, a message indicates whether the update was successful.

Click on Finish to close the Wizard for downloading new firmware program.

After completing the firmware update, reboot your PC if you are prompted to do so.

The update can take up to several minutes.
During the update, you may not start any other PC applications.
You may not cancel the firmware update.