Sterling AquaSnap 30RA010-055 - Manual (Page 78)

78
CIRCBDIO (Circuit B Discrete Inputs/Outputs)
CIRCB_AN (Circuit B Analog Parameters)
OPTIONS (Unit Parameters)
DESCRIPTION VALUE UNITS POINT NAME FORCEABLE
CIRC. B DISCRETE OUTPUTS
Compressor B1 Relay On/Off K_B1_RLY N
Compressor B2 Relay On/Off K_B2_RLY N
Minimum Load Valve Relay On/Off MLV_RLY N
CIRC. B DISCRETE INPUTS
Compressor B1 Feedback
On/Off K_B1_FBK N
Compressor B2 Feedback On/Off K_B2_FBK N
DESCRIPTION VALUE UNITS POINT NAME FORCEABLE
CIRCUIT B ANALOG VALUES
Percent Total Capacity 0-100 % CAPB_T N
Percent Available Cap. 0-100 % CAPB_A N
Discharge Pressure nnn.n PSIG DP_B N
Suction Pressure nnn.n PSIG SP_B N
Calculated HP Setpoint B nnn.n °°°°F HSP_B N
Saturated Condensing Tmp snnn.n °°°°F TMP_SCTB N
Saturated Suction Temp snnn.n °°°°F TMP_SSTB N
Compr Return Gas Temp snnn.n °°°°F TMP_RGTB N
Suction Superheat Temp snnn.n ∆∆∆∆F SH_B N
DESCRIPTION VALUE UNITS POINT NAME FORCEABLE
FANS
Fan 1 Relay
Off/On FAN_1 N
Fan 2 Relay Off/On FAN_2 N
Cooler/Pump Heater Off/On COOL_HTR N
UNIT ANALOG VALUES
Cooler Entering Fluid snnn.n °°°°F COOL_EWT N
Cooler Leaving Fluid snnn.n °°°°F COOL_LWT N
Lead/Lag Leaving Fluid snnn.n °°°°F DUAL_LWT N
TEMPERATURE RESET
4-20 mA Reset Signal nn.n mA RST_MA N
Outside Air Temperature snnn.n °°°°F OAT Y
Space Temperature snnn.n °°°°F SPT Y
DEMAND LIMIT
4-20 mA Demand Signal
nn.n mA LMT_MA N
Demand Limit Switch 1 Off/On DMD_SW1 N
Demand Limit Switch 2 Off/On DMD_SW2 N
SCN Loadshed Signal 0 = Normal
1 = Redline
2 = Loadshed
DL_STAT N
MISCELLANEOUS
Heat Request Off/On HEAT_REQ N
Dual Setpoint Switch Off/On DUAL_IN N
Cooler LWT Setpoint snnn.n °°°°F LWT_SP N
Ice Done Off/On ICE_DONE N