SUPER MICRO Computer X6DHi-G2 - Manual (Page 98)

C-8
X6DH3-G2/X6DHi-G2 User's Manual
Assigning Array Properties
Once you've create a new array, you are ready to assign the properties to the ar-
ray.
*Caution: Once the array is created and its properties are assigned, you cannot
change the array properties using the ACU. You will need to use the Adaptec Storage
Manager - Browser Edition. (Refer to Adaptec's User's Guide in the enclosed CD.)
To assign properties to the new array:
1. In the Array Properties menu (as shown in the screen below), select an array
type and press Enter.
Note: only the available array types: RAID 0, and RAID1, are displayed on the
screen. (*RAID 0 or RAID 1 requires two drives.)