SUPER MICRO Computer X6DHi-G2 - Manual (Page 105)

Appendix C: Software Installation
C-15
Rebuilding Arrays
Note 1: Rebuilding applies to Fault Tolerant array (RAID 1) only.
If an array Build process (or initialization) is interrupted or critical with one member
missing, you must perform a Rebuild to get the array to Optimal status. For a critical
array Rebuild operation, the optimal drive is the source drive.
Note 2: If no spare array exists and a hard disk drive fails, you need to create a spare
before you can rebuild an array.
To Rebuild an array:
1. From the Main Menu, select Manage Arrays (as shown in the screen below). From
the List of Arrays, select the array you want to Rebuild.
2. Press Ctrl+R to Rebuild.