beautypg.com

Preface, About this manual, Manual organization – SUPER MICRO Computer X6DHi-G2 User Manual

Page 3: Conventions used in the manual

background image

iii

Preface

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use of the

X6DH3-G2/X6DHi-G2 motherboard. The X6DH3-G2/X6DHi-G2 supports single or

dual Intel

®

Xeon EM64T processors at a 800 MHz front side bus. The X6DH3-G2/

X6DHi-G2 supports Hyper-Threading Technology and is ideal for high performance

workstation and server environments with up to two processors on one system bus.

The X6DH3-G2/X6DHi-G2 also supports the Enhanced Intel SpeedStep Technology

(EIST). Please refer to the motherboard specifi cations pages on our web site (http://

www.supermicro.com/Products) for updates or visit Intel's web site for processor

support. This product is intended to be professionally installed.

Manual Organization

Chapter 1 describes the features, specifi cations and performance of the mainboard

and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when

installing the processor, memory modules and other hardware components into

the system. If you encounter any problems, see Chapter 3, which describes

troubleshooting procedures for the video, the memory and the system setup stored

in CMOS.

Chapter 4 includes an introduction to BIOS and provides detailed information on

running the CMOS Setup utility.

Appendix A provides BIOS POST Messages.

Appendix B lists BIOS POST Codes.

Appendix C lists Software Installation Instructions.

Conventions Used in the Manual:

Special attention should be given to the following symbols for proper installation and
to prevent damage done to the components or injury to yourself:

Danger/Caution: Instructions to be strictly followed to prevent catastrophic

system failure or to avoid bodily injury.

Warning: Important information given to ensure proper system installation

or to prevent damage to the components.

Note: Additional Information given to differentiate various models or to ensure cor

rect system setup.

This manual is related to the following products: