SUPER MICRO Computer X6DHi-G2 - Manual (Page 25)

Chapter 2: Installation
2-5
Figure 2-1. PGA604 Socket: Empty and with Processor Installed
Mounting the Motherboard in the Chassis
All motherboards have standard mounting holes to fi t different types of chassis.
Make sure that the locations of all the mounting holes for both the motherboard and
the chassis match. Make sure that the metal standoffs click in or are screwed in
tightly and then, use a screwdriver to secure the motherboard onto the motherboard
tray.(Note: some components are very close to the mounting holes. Please take all
necessary precautionary measures to prevent damage done to these components
when installing the motherboard into the chassis.)
Lever
Processor
(installed)
Triangle
Triangle
Empty socket
Warning! Make
sure you lift the lever
completely when
installing the CPU.
If the lever is only
partly raised, damage
to the socket or CPU
may result.
!