SUPER MICRO Computer X6DHi-G2 User Manual
Page 67
Chapter 4: BIOS
4-11
Large Disk Access Mode
This setting determines how large hard drives are to be accessed. The options are
DOS or Other (for Unix, Novelle NetWare and other operating systems).
Advanced Chipset Control
Access the submenu to make changes to the following settings.
Force Compliance Mode
This feature allows you to enable the PCI-Express Compliance Mode. The options
are Disabled and Enabled.
Memory RAS Feature Control
Select this option in order to enable the special feature of DIMM sparing or memory
mirroring. The options are Mirroring, Sparing and Standard.
Clock Spectrum Feature
If "Enabled", the BIOS will monitor the level of Electromagnetic Interference caused
by the components and will attempt to decrease the interference whenever needed.
The options are Enabled and Disabled.
Memory Remap Function Control
PCI memory resources will overlap with the physical memory if 4GB of memory or
above is installed on the motherboard. When this occurs, enable this function to
reallocate the overlapped physical memory to a location above 4GB to resolve the
memory overlapping situation.
Delayed Transaction Discard
Select Disabled to set the ESB P2P Bridge Secondary Discard Timer to 32 micro-
seconds for the PCI-32 bus. Select Enabled to set the ESB P2P Bridge Secondary
Discard Timer to 4 micro-seconds for the PCI-32 bus.
DRAM Data Integrity Mode
If enabled, this feature allows the data stored in the DRAM memory to be integrated
for faster data processing. The options are 72-bit ECC, 144-bit ECC, Auto and
Disabled.
ECC Error Type
This setting lets you select which type of interrupt to be activated as a result of an
ECC error. The options are None, NMI (Non-Maskable Interrupt), SMI (System
Management Interrupt) and SCI (System Control Interrupt.)