Sanyo PLC-WXE45 - Manual (Page 48)

48
The PIN code can be changed to your desired four-digit
number.
Select "PIN code change" with the Point ▼ button, and
press the SELECT button to display the New PIN code
input dialog box.
Select a number by pressing the Point ▲▼ buttons. And
then press the Point ► button to fix the number and
move the pointer. Repeat it to complete entering a four-
digit number. After entering the four-digit number, move
the pointer to "Set" by pressing the Point ► button. Then
press the SELECT button.
Chan�e the PIN code Chan�e the PIN code
Select PIN code change and
press the SELECT button.
The New PIN code input
dialog box appears.
CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE, WRITE
DOWN THE NEW PIN CODE IN COLUMN OF THE
PIN CODE NO. MEMO ON PAGE 70, AND KEEP IT
SECURELY. IF YOU FORGET YOUR PIN CODE, THE
PROJECTOR CAN NO LONGER BE STARTED.
Alarm
Make some settings for the Antitheft alarm function. (pp.
51-53)
Press the SELECT button at Alarm icon to display the
Alarm setting box.
When the Antitheft alarm function is set, "On" is
displayed. When the function is released, "Off" is
displayed. See p. 51 to set or release this function.
Select Alarm volume, Sensitivity or Ringing time with the
Point ▲▼ buttons, and set each item with the Point ◄►
buttons.
Alarm volume
Small
Medium
Large
Sensitivity
Low .................. Less sensitive.
Medium ........... Normal sensitive.
High ................ Highly sensitive (default setting).
Ringing time
10 seconds ..... Default setting.
Ring about 10 seconds.
60 seconds ..... Ring about 60 seconds.
Long time ......... Ring until the end of the battery life.
Alarm
Alarm volume
Sensitivity
Ringing time
Press the SELECT button at the Alarm
icon to display the Alarm setting box.

Note:
•The Alarm icon becomes gray and cannot
be selected when the Antitheft alarm
function is "On", a battery is not installed,
or the battery is coming to the end of its
life.
•While the Alarm icon is selected, the
Antitheft alarm setting buttons on the
side panel cannot be operated.
•When selecting "Long time" in Ringing
time, the length of alarm ringing time
differs depending on the battery life.
Set Sensitivity or
Ringing time with
t h e P o i n t ◄ ►
buttons.
Settin�
The input numbers are
being displayed for
confirmation.