Sanyo PLC-WXE45 - Manual (Page 32)

Store
Exit the Image Adjust Menu.
Quit
To store the adjusted data, select “Store” and press the
SELECT button. The Image Level Menu appears. Use the
Point ▲▼ buttons to choose one of the four image level and
press the SELECT button. A confirmation box appears and
then select “Yes.”
The stored data can be called up by selecting “Image” in the
Image Level Selection on page 30.
Move the red frame
pointer to the desired
image level (from Image
1 to 4) and then press
the SELECT button.
A confirmation
box appears,
then select “Yes.”
Store item
Press the SELECT button
at this item to store the
adjusted data.
This projector has the picture screen resize function, which enables you to customize the image size.
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
frame pointer to the Screen Menu icon.
1
Move the red frame pointer
to the function and press
the SELECT button.
Use the Point
▲▼
buttons and move the red frame
pointer to the desired function and then press the
SELECT button.
2
Screen Menu
Screen Menu icon
Screen Size Adjustment
Provide the image to fit the screen size while maintaining
the aspect ratio of input signal.
Normal
True
Provide the image in its original size. When the original
image size is larger than the screen size (1280 x 800), the
projector automatically switches to the panning mode. Use
the Point ◄► ▲▼ buttons to pan the image. When adjusted,
the arrows turn red. When reached to the correction limit,
the arrows disappear.
Full
Provide the full screen image.
Note:
• This projector cannot display any
resolution higher than 1600 x 1200. If your
computer’s resolution is higher than that,
lower the resolution before connecting to
the projector.
• The image data other than 1280 x 800
is modified to fit the screen size in initial
mode.
• True, Full and D.Zoom+/- are not available
when the 4:3 or 16:9 function is selected in
the Screen aspect (p.44).
• The items will be same as the items in
video source when 480i, 575i, 480p, 575p,
720p, 1035i or 1080i is selected in the PC
system Menu (p.26).
Computer Input