Setting – Sanyo PLC-WXE45 User Manual

Page 43

Logo PIN code lock Dialog Box

Enter a Logo PIN code

Select a number by pressing the Point

▲▼

buttons.

And then press the Point

►

button to fix the number

and move the pointer. The number changes to "

". If

you fixed an incorrect number, move the pointer to the
number you want to correct by pressing the Point

◄

button, and then select the correct number by pressing
the Point

▲▼

buttons.

Repeat this step to complete entering a four-digit
number.

After entering the four-digit number, move the pointer to
"Set" by pressing the Point

►

button. Press the SELECT

button so that you can change the following Logo PIN
code lock settings.

If you entered an incorrect PIN code, "Logo PIN code"
and the number (

) turns red. Enter a correct

Logo PIN code all over again.

Change the Logo PIN code

Logo PIN code can be changed to your desired four-digit
number. Select “Logo PIN code change” with the Point

▼

button and press the SELECT button. Set a new Logo

PIN code.

Be sure to note the new Logo PIN code and keep it on
hand. If you lost the number, you could no longer change
the Logo PIN code setting. For details on PIN code
setting, refer to relevant instructions of the PIN code lock
function on pages 47–48.

Logo PIN code lock

This function prevents an unauthorized person from
changing the screen logo.

Off…… the screen logo can be changed freely from

the Logo select menu (p.42).

On…… the screen logo cannot be changed without

the Logo PIN code.

If you want to change the Logo PIN code lock setting,
enter a Logo PIN code along the following steps. The
initial Logo PIN code is set “4321” at the factory.

Logo PIN code lock

CAUTION:
whEN yOU hAvE ChANgED ThE LOgO PIN CODE,
wrITE DOwN ThE NEw PIN CODE IN COLUmN Of
ThE LOgO PIN CODE NO. mEmO ON PAgE 70, AND
kEEP IT sECUrELy. shOULD ThE LOgO PIN CODE
BE LOsT Or fOrgOTTEN, ThE LOgO PIN CODE
sETTINg CAN NO LONgEr BE ChANgED.

After a correct Logo PIN code is entered, the
following dialog box appears.

Select On/Off by pressing the Point

◄►

buttons or

change the Logo PIN code.

setting