Image level selection, Ima�e level selection, Computer input – Sanyo PLC-WXE45 User Manual
Page 30
Press the MENU button to display the On-Screen
Menu. Use the Point
◄►
buttons to move the red
frame pointer to the Image Select Menu icon.
1
2
Use the Point
▲▼
buttons to move the red frame
pointer to the desired level and then press the SELECT
button.
Ima�e Select Menu
Normal picture level preset on this projector.
Standard
Picture level with improved halftone for graphics.
Real
For viewing the image projected on a blackboard. See
above for further description.
Blackboard(Green)
Image Select Menu icon
Select an image level from among Dynamic, Standard,
Real, Blackboard (Green), Colorboard, Image 1, Image 2,
Image 3, and Image 4 with the IMAGE button on the remote
control.
IMAGE button
Dynamic
Real
Colorboard
Ima�e 1
Ima�e
Normal picture level preset on the projector.
Picture level with improved halftone for graphics.
Standard
Real
Ima�e 1–4
Ima�e Level Selection
Direct Operation
Menu Operation
Ima�e
User preset image in the Image Adjust Menu (pp.31-32).
Ima�e 1–4
Blackboard (Green)
For viewing the image projected on a blackboard. This mode
assists to enhance the image projected on a blackboard.
This is mainly effective on a green colored board, not truly
effective on a black colored board.
Blackboard(Green)
For viewing pictures in a bright room.
Dynamic
For viewing pictures in a bright room.
Dynamic
User preset image in the Image Adjust Menu (pp.31-32).
Standard
Remote Control
IMAGE
button
0
Computer Input
Ima�e 4
Colorboard
At the time of simple projection on the colored wall, you
can get the close color image to the color image projected
on a white screen by selecting the similar color to the wall
color from the preset four colors.
At the time of simple projection on the colored wall, you
can get the close color image to the color image projected
on a white screen by selecting the similar color to the wall
color from the preset four colors. Press the SELECT button
to choose the color.
Colorboard
Move the red frame pointer to
the desired level and press the
SELECT button.
The image level being selected.