Sanyo PLC-WXE45 - Manual (Page 23)

Remote Control
Remote Control Operation
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons
enables you to make the desired operation quickly without calling up the On-Screen Menu.
COMPUTER/VIDEO button
Note:
See the next page for the description of
other buttons.
Press the FREEZE button to freeze the picture on the
screen. To cancel the Freeze function, press the FREEZE
button again or press any other button.
FREEZE button
Press the COMPUTER or VIDEO button to select an input
source. See pages 25, 34–35 for more details.
COMPUTER/VIDEO button
FREEZE button
1
2
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
frame pointer to the Sound Menu icon.
Press the VOLUME+/– buttons on the remote control to
adjust the volume. The volume dialog box appears on the
screen for a few seconds.
Press the MUTE button on the remote control to turn off the
sound. To restore the sound to its previous level, press the
MUTE button again or press the VOLUME+/– buttons. Mute
function is also effective for AUDIO OUT jack.
Press the Point ◄► buttons to switch the mute function
On/Off. When the sound is turned off, “On” is displayed.
Press the Point ◄► buttons again to turn the sound back
on.
Press the Point ▲▼ buttons to move the red frame
pointer to the desired item, and then press the
SELECT button.
Approximate level of
the volume.
Exit the Sound Menu.
Volume
Mute
Approximate level
of the volume.
Press the MUTE button to set the Mute function
On or Off. The display disappears after 4 seconds.
Sound Menu
Sound Menu
icon
Volume
Remote Control
VOLUME+ button
VOLUME- button
MUTE button
Volume
Mute
Press the Point ► button to turn up the volume; press the
Point ◄ button to turn down the volume.
Mute
Direct Operation
Menu Operation
Sound Adjustment
Basic Operation