Sun Microsystems Netra 120 - Manual (Page 162)

11-8 Sun Fire V120 and Netra 120 Server User’s Guide • December 2001
9. Reconnect the memory card reader board’s power cable to its connector on the
system board.
10. Insert the new DVD or CD-ROM drive (see Section 4.4.1, “Installing a DVD or
CD-ROM Drive” on page 4-7).
11. Now replace the plastic bracket that secures the paddleboard, and screw it into the
chassis base (see FIGURE 11-3 ).
12. Replace the full-length PCI card if you removed it earlier (see Section 4.6.1,
“Installing a PCI Card” on page 4-11).
13. Replace the system cover and tighten the captive screw (see FIGURE 4-9 in
Section 4.7, “Replacing the Server’s Top Cover” on page 4-14).
FIGURE 11-3 Replacing the Paddleboard at the Back of the DVD or CD-ROM Drive
Enclosure
Card
reader’s
cable
connector
Plastic
bracket