Sun Microsystems Netra 120 User Manual
Page 12

xii
Sun Fire V120 and Netra 120 Server User’s Guide • December 2001
FIGURE 4-6
Installing Memory into a Socket on the System Board
4-10
FIGURE 4-7
The Rotating Retention Bracket and the Position of a PCI Card
4-12
FIGURE 4-8
Using the PCI Card Retainer, Slide Support Rail, and Plastic Bracket
4-13
FIGURE 4-9
Replacing the Top Cover
4-15
FIGURE 5-1
Cable Management Bracket
5-2
FIGURE 5-2
Positioning the Slide Mounts for a Sun StorEdge 72-Inch Tall Rack
5-3
FIGURE 5-3
Positioning the Slide Mounts for a Standard 19-Inch Wide Rack
5-3
FIGURE 5-4
Fastening the Slide Mounts to a Sun StorEdge 72-inch Tall Rack–Rear View (Side Panels
Removed for Clarity)
5-5
FIGURE 5-5
Fastening the Slide Mounts to a Sun StorEdge 72-inch Expansion Rack–Front View (Side
Panels Removed for Clarity)
5-6
FIGURE 5-6
Fastening the Slide Mounts to a Standard 19-inch Rack
5-7
FIGURE 5-7
Sliding the Server Into a Standard 19-Inch Rack
5-8
FIGURE 5-8
Adjusting the Slide Mounts and Screwing the Server Into the Rack
5-9
FIGURE 5-9
Fitting the Cable Management Bracket to a Sun StorEdge or a Standard 19-Inch Rack
5-10
FIGURE 5-10
Removing the Thumbscrew Brackets
5-12
FIGURE 5-11
Fitting the Fixed Mounting Brackets
5-13
FIGURE 5-12
The Server Installed in a Two-Post Rack
5-14
FIGURE 6-1
Connecting the Cables to the Sun Fire V120 Server
6-2
FIGURE 6-2
Connecting the Cables to the Netra 120 Server
6-2
FIGURE 6-3
Patch Panel Connection Between a Terminal Server and a Sun Fire V120
6-5
FIGURE 6-4
Pins 1 to 8 on the Serial Port
6-6
FIGURE 6-5
Pins 1 to 8 on the Serial Ports
6-7
FIGURE 6-6
Pins 1 to 8 on the Serial Ports
6-8
FIGURE 1
Connecting the Server to the Serial Port on a Laptop
6-10
FIGURE 7-1
Netra 120 Server Power (On/Standby) Switch
7-7
FIGURE 7-2
Sun Fire V120 Server Power (On/Standby) Switch
7-7
FIGURE 8-1
The Location of the Lights-Out Management Device on the System Board
8-2
FIGURE 8-2
Sample Output From the
environment
Command
8-9