5 at*e2stki m2m stk get input, 5 at*e2stki, M2m stk get input – Sony Ericsson GM47 User Manual
Page 293: Values follow gsm 11.14 standard

17. SIM APPLICATION TOOLKIT
293
LZT 123 7263 R1C
Values follow GSM 11.14 standard.
17.5 AT*E2STKI
M2M STK Get Input
The ME passes the parameters within GET INPUT command to the
external application by means of the unsolicited result code E2STKI.
The external application sends AT*E2STKI with the user response.
AT*E2STKI allows the external application to send the appropriate
answer after receiving the unsolicited result code, and before the
timeout expires.
If Answer command is sent once the timeout expires, an ERROR
response is generated.
If
parameters are sent. If the extra parameters are sent, the ME indicates
ERROR.
Description
0
Text is coded in unpacked format, using the SMS
default 7-bit coded alphabet, as defined in GSM 03.38
with bit 8 set to 0. It corresponds to data coding
scheme of 8 bit
1
Text is coded in packed format, using the SMS default
7-bit coded alphabet, packed in 8-bit octets, as
defined in GSM 03.38. It corresponds to data coding
scheme of 7 bit GSM default alphabet
Description
Integer type (0-235)
Value indicating the maximum length of field
Description
String type
Field of maximum length
string type format between “”. Coding is defined in
Description
Command
Possible responses
Answer to the
reception of GET
INPUT
AT*E2STKI=
[
• +CME ERROR
• OK
• ERROR
Show if the
command is
supported
AT*E2STKI=?
• *E2STKI: (list of supported
• +CME ERROR
• OK
• ERROR