Sony Ericsson GM47 - Manual (Page 164)

GM47/GM48 INTEGRATOR’S MANUAL
164
LZT 123 7263 R1C
6.7 AT+CGQMIN Quality of Service Profile (Minimum Acceptable)
Allows the TE to specify a minimum acceptable profile which is
checked by the MS against the negotiated profile returned in the
Activate PDP Context Accept message.
The set command specifies a profile for the context identified by the
(local) context identification parameter, . Since this is the same
parameter that is used in the +CGDCONT command, the +CGQMIN
command is effectively an extension to the +CGDCONT command.
The QoS profile consists of a number of parameters, each of which may
be set to a separate value.
A special form of the set command, +CGQMIN= causes the
minimum acceptable profile for context number to become
undefined. In this case no check is made against the negotiated profile.
Description Command Possible Responses
Set minimum
acceptable
profile
+CGQMIN=[
[,
[, [,
[,
[,]]]]]]
• +CME ERROR:
• OK
• ERROR
Show the
current
setting
+CGQMIN? • +CGQMIN: ,
, ,
, ,
[+CGQMIN:
, ,
, , ,
[…]]
• OK
• ERROR
Show if the
command is
supported
+CGQMIN=? • +CGQMIN: , (list of
supported s),
(list of supported s),
(list of supported s)
, (list of supported s),
(list of supported
s)[+CGQMI
N: , (list of
supported s),
(list of supported s),
(list of supported s)
, (list of supported s),
(list of supported
s)[…]]
• OK
• ERROR
Description
Integer type Parameter which specifies a particular PDP context
definition