Sony Ericsson GM47 - Manual (Page 271)

15. SHORT MESSAGE SERVICES - POINT TO POINT
271
LZT 123 7263 R1C
Description
String type GSM 03.40 TP-Originating-Address Value in string format;
BCD numbers (or GSM default alphabet characters) are
converted to characters of the currently selected TE
character (refer command +CSCS). Type of address given
by
Description
String type GSM 03.40 TP-Destination-Address Value in string format;
BCD numbers (or GSM default alphabet characters) are
converted to characters of the currently selected TE
character (refer command +CSCS). Type of address given
by
Description
String type GSM 04.11 TP-Destination- Address Type-of-Address octet
in integer format (when first character of is +(IRA 43)
default is 145, otherwise default is 129
Description
String type GSM 04.11 TP-Originating-Address Type-of-Address octet
in integer format (default refer )
Description
String type GSM 04.11 TP-Recipient-Address Type-of-Address octet in
integer format (default refer )
Description
String type Manufacturing specific. Should be left empty but not
omitted, i.e. commas shall mark the place were it should
be. Used character set should be the one selected with
command Select TE Character Set +CSCS
Description
String type GSM 03.40 TP-Service-Centre-Time-Stamp in time-string
format (refer
Description
Integer type Value indicating in PDU mode (+CMGF=0), the length of
the actual TP data unit in octets (i.e. the RP layer SMSC
address octets are not counted in the length)