Sony Ericsson GM47 - Manual (Page 147)

4. AUDIO
147
LZT 123 7263 R1C
4.14 AT*ERIP Ericsson Ring Signal Playback Command
Used to play one of the sound types which are available as ring signals/
message signals on the module. The signal volume may not be chosen
as “step”; with an increasing volume for each signal. If value 1 is chosen
for parameter , nothing should happen. Signal volume may be
chosen as a selected level.
Refer to the AT*ERIN command for the parameter.
Description
0 Off. Not supported
1 Low ring signal
2 Medium ring signal
3 High ring signal
4 Mixed ring signal
5 Beep. Not supported
6 Alarm. Not supported
7 Calendar Tone. Not supported
8 Calendar Click. Not supported
9-10 Reserved. Not supported
11-20 Melody 1. Melody 10 reserved for preset melodies
21-30 Reserved. Not supported
31-38 Own melodies 1-8
39-5 Reserved for own melodies. Not supported
Description Command Possible Responses
Plays the selected
sound type at
specified volume level
AT*ERIP =
,
type>
• +CME ERROR:
• OK
• ERROR
Show if the command
is supported
AT*ERIP=? • *ERIP: (list of
supported
s),(list of
supported
type>s)
• OK
• ERROR
Description
0 Off
1 Step. Not Supported
2-n Volume setting