Sony Ericsson GM47 - Manual (Page 256)

GM47/GM48 INTEGRATOR’S MANUAL
256
LZT 123 7263 R1C
Text Mode
Stores message (either SMS-DELIVER or SMS-SUBMIT) to memory
storage . Memory location of the stored message is
returned. By default message status will be set to ‘stored unsent’, but
parameter allows also other status values to be given. The
entering of text is done as specified in the send message command,
+CMGS. If writing fails, final result code +CMS ERROR: is
returned.
Note! SMS-COMMANDs and SMS-STATUS-REPORTs cannot be stored in
text mode.
Description Command Possible Responses
Write message to
memory
AT+CMGW [=
[,[,]]]
Text is entered
ESC>
• +CMGW:
• +CMS ERROR:
• OK
• ERROR
Show if the command
is supported
AT+CMGW=? • OK
• ERROR
Description
2 Stored unsent message (only applicable to SMs)
Description
String type GSM 03.40 TP-Originating-Address Value in string format;
BCD numbers (or GSM default alphabet characters) are
converted to characters of the currently selected TE
character (refer command +CSCS). Type of address given
by
Description
String type GSM 03.40 TP-Destination-Address Value in string format;
BCD numbers (or GSM default alphabet characters) are
converted to characters of the currently selected TE
character (refer command +CSCS). Type of address given
by
Description
String type GSM 04.11 TP-Originating-Address Type-of-Address octet
in integer format (default refer )
Description
String type GSM 04.11 TP-Destination- Address Type-of-Address octet
in integer format (when first character of is +(IRA 43)
default is 145, otherwise default is 129