Sony Ericsson GM47 - Manual (Page 326)

GM47/GM48 INTEGRATOR’S MANUAL
326
LZT 123 7263 R1C
+CLIP: ,
Example
AT+CLIP=1
OK
RING
+CLIP: “07747008670”,129,,,“Matt L”,0
18.15 AT+CLIR Calling Line Identification Restriction
This command refers to CLIR-service according to GSM 02.81 that
allows a calling subscriber to enable or disable the presentation of the
CLI to the called party when originating a call.
Set command overrides the CLIR subscription (default is restricted or
allowed) when temporary mode is provisioned as a default adjustment
for all following outgoing calls. Using the opposite command can
revoke this adjustment. If this command is used by a subscriber without
provision of CLIR in permanent mode the network will act according
GSM 02.81.
The setting shall be per logical channel.
Description
String type String type phone number of format specified by
Description
Integer format Type of address octet in integer (refer to GSM 04.08 sub-
clause 10.5.4.7)
Description Command Possible Responses
Request calling line
identification restriction
AT+CLIR=[] • +CME ERROR
• OK
• ERROR
Show the current
setting
AT+CLIR? • +CLIR: ,
• +CME ERROR
• OK
• ERROR
Show if the command
is supported
AT+CLIR=? • +CLIR: (list of supported
s)
• +CME ERROR
• OK
• ERROR