Sony Ericsson GM47 - Manual (Page 114)

GM47/GM48 INTEGRATOR’S MANUAL
114
LZT 123 7263 R1C
3.19 AT+CEER Extended Error Report
Causes the TA to return one or more lines of information text .
Typically, the text will consist of a single line containing the failure
information given by the GSM network in text format.
3.20 AT+CFUN Set Phone Functionality
Selects the level of functionality in the MS. Level “full
functionality” results in the highest level of power drawn. “Minimum
functionality” results in the minimum power drawn. Manufacturers may
also specify levels of functionality between these two end levels.
Test command returns values supported by the ME as a compound.
Note! “AT+CFUN=” is interpreted as “AT+CFUN=0”.
Description Command Possible Responses
Request an Extended
Error Report
AT+CEER • +CEER:
• OK
• ERROR
Show if the command
is supported
AT+CEER=? • OK
• ERROR
Description
characters The total number of characters, including line terminators,
in the information text shall not exceed 2041 characters.
Text shall not contain the sequence 0 or OK
Description Command Possible Responses
Set MS functionality AT+CFUN= • +CME ERROR:
• OK
Show the current
setting
AT+CFUN? • +CFUN:
• +CME ERROR:
Show if the
command is
supported
AT+CFUN=? • +CFUN: (list of
supported s)
• +CME ERROR:
Description
0 Minimum functionality. Default value
Note: The ME is turned off
1 Full functionality.
Note: If previously turned off, the phone is turned on