Sony Ericsson GM47 - Manual (Page 118)

GM47/GM48 INTEGRATOR’S MANUAL
118
LZT 123 7263 R1C
Unsolicited Result Codes:
+CKEV: ,
+CIEV: ,
3.25 AT+CPAS Phone Activity Status
Returns the activity status of the ME. It can be used to interrogate
the ME before requesting action from the phone.
When the command is executed without the argument, the
command returns values from 0 to 128 (for supported values see
table below). When, on the other hand, the command is executed with
the argument set to 1, the command may return Ericsson
specific values from 129 to 255 (for supported values see the
table below).
Description
0 No indicator event reporting
1 Indicator event reporting using result code +CIEV:
,. indicates the indicator order number
(as specified for +CIND) and is the new value of
indicator. Only those indicator events, which are not
caused by +CIND shall be indicated by the TA to the TE
Description
0 TA buffer of unsolicited result codes defined within this
command is cleared when 1...3 is entered
Description Command Possible Responses
Execute Phone Activity
Status
AT+CPAS[=] • +CPAS:
• +CME ERROR
• OK
• ERROR
Show if the command
is supported
AT+CPAS=? • +CPAS:
(list of supported
s)
• +CME ERROR
• OK
• ERROR