Sony Ericsson GM47 - Manual (Page 169)

6. DATA - GPRS
169
LZT 123 7263 R1C
6.9 AT+CGREG GPRS Network Registration Status
Controls the presentation of an unsolicited result code +CGREG:
when =1 and there is a change in the GPRS/packet domain network
registration status of the MS, or code +CGREG: [,,]
when =2 and there is a change of the network cell.
Note! If the GPRS/Packet Domain MS also supports circuit mode services, the
+CGREG command and +CGREG: result code apply to the registration
status and location information for those services.
Description Command Possible Responses
Set command AT+CGREG=[] • +CME ERROR:
• OK
• ERROR
Show the current
setting
AT+CGREG? • +CGREG:
,[,,
]
• +CME ERROR:
• OK
• ERROR
Show if the command
is supported
AT+CGREG=? • +CGREG: (list of
supported s)
• OK
• ERROR
Description
0 Disable network registration unsolicited result code
1 Enable network registration unsolicited result code
2 Enable network registration and location information
unsolicited result code
Description
0 Not registered, MS is not searching for a new operator to
register with
1 Registered, home network
2 Not registered, but MS is searching for a new operator to
register with
3 Registration denied
4 Unknown
5 Registered, roaming
Description
String type Two byte location area code in hexadecimal format