Sony Ericsson GM47 - Manual (Page 145)

4. AUDIO
145
LZT 123 7263 R1C
4.12 AT*ERIL Ericsson Ring Level Set
Used to set the volume for the ring signals used for incoming voice,
Line 1, Line 2, fax and data calls. The parameter controls the
ring level set for different types of modes. The signal volume is
specified as “step”, with an increasing volume for each signal, or as a
selected level.
Line 1 is the default for if the parameter is not given.
Description Command Possible Responses
Sets ring volume for the
ring signals used for
incoming voice (L1
and L2), fax and data
calls
AT*ERIL=[,
all type>
[,]]
• +CME ERROR:
• OK
• ERROR
Show the current
setting
AT*ERIL? • *ERIL:
[,
type1> [,
[…*ERIL:
[,
type n> [,
n>]]]]]
• +CME ERROR:
• OK
• ERROR
Show if the command
is supported
AT*ERIL=? • *ERIL: (list of
supported
s)[,(list of
supported
type>s)
[,(list of supported
s)]]
• +CME ERROR:
• OK
• ERROR
Description
0 Off
1-6 Volume setting, not increasing ring
129-134 Volume setting, increasing ring
Description
1 Line 1
2 Line 2
3 Fax
4 Data
5 Alarm. Not supported