Sony Ericsson GM47 - Manual (Page 160)

GM47/GM48 INTEGRATOR’S MANUAL
160
LZT 123 7263 R1C
6.4 AT+CGDCONT Define PDP Context
Specifies PDP context parameter values for a PDP context identified by
the (local) context identification parameter, .
Description Command Possible Responses
Select PDP
context
parameters
+CGDCONT=[
[, [,
[,
[,
[, [,
[,…[,pdN]]]]]]]]]
• +CME ERROR:
• OK
• ERROR
Show the
current setting
+CGDCONT? • +CGDCONT: ,
,,
,,
[,[,…[,pdN]]]
[+CGDCONT:
, ,,
,,
[,[,…[,pdN]]]
[...]]
• OK
• ERROR
Show if the
command is
supported
+CGDCONT=? • +CGDCONT: (range of
supported s),
,,,(list of
supported s),
(list of supported s)
[,(list of supported s)
[,…[,(list of supported
s)]]]
[+CGDCONT:
(range of supported s),
,,,(list of
supported s),
(list of supported s)
[,(list of supported
s)[,…[,(list of supported
s)]]] [...]]
• OK
• ERROR
Description
Integer type (PDP Context Identifier) a numeric parameter which
specifies a particular PDP context definition. The
parameter is local to the TE-MS interface and is used in
other PDP context-related commands. The range of
permitted values (minimum value = 1) is returned by the
test form of the command
1-10 Supported values. Ericsson specific
Description
IP Internet Protocol (IETF STD 5)