Sony Ericsson GM47 - Manual (Page 155)

5. DATA - CSD/HSCSD
155
LZT 123 7263 R1C
5.2 AT+CRLP Radio Link Protocol
Radio link protocol (RLP) parameters used when non-transparent data
calls are originated may be altered with this command. Available
command subparameters depend on the RLP versions implemented by
the device (e.g. may not be available if device supports only
versions 0 and 1).
Read command returns current settings for each supported RLP version
. Only RLP parameters applicable to the corresponding
are returned.
Test command returns values supported by the TA as a compound
value. If ME/TA supports several RLP versions , the RLP
parameter value ranges for each are returned in a separate line.
Description Command Possible Responses
Set radio link
protocol
AT+CRLP=[
[,[,
[,[,
[, ]]]]]]
• OK
• ERROR
Show the
current setting
AT+CRLP? • +CRLP:
,,,[,
[,]][
• +CRLP:
,,,[,
[,]][...]]
• OK
• ERROR
Show if the
command is
supported
AT+CRLP=? • +CRLP: (list of supported s),
(list of supported s),
(list of supported s),
(list of supporteds)[,
[,(list of supported s)]]
[+CRLP: (list of
supported s), (list of
supported s), (list of
supported s), (list of
supported s)[,[,(list of
supported s)]][...]]
• OK
• ERROR
Description
120
0 - 496
IWF to MS window size
Description
120
0 - 496
MS to IWF window size