Sony Ericsson GM47 - Manual (Page 292)

GM47/GM48 INTEGRATOR’S MANUAL
292
LZT 123 7263 R1C
Answer command allows the external application to send the
appropriate answer, after receiving the unsolicited result code, and
before the timeout expires.
If Answer command is sent once the timeout expires, an ERROR
response is generated.
If parameter is not 0, a failure has occurred and no more
parameters are sent. If the extra parameters are sent, the ME indicates
ERROR.
Test command returns the list of supported values, and the maximum
value of .
Values follow GSM 11.14 standard.
Unsolicited Result Codes:
*E2STKG: ,,
Description
0 OK.
Performed as required: the text was displayed. It
corresponds to ‘00’ Command performed successfully,
described in the GSM standard
1 Failed.
User Terminated Session: the text was displayed as
requested and the user wants to end the proactive
session. It corresponds to ‘10’ Proactive session
terminated by the user, described in the GSM standard
2 Failed.
User requests backward move: the text was displayed
as requested and the user wants to go backwards in
the session. It corresponds to ‘11’ Backward move in
the proactive SIM session requested by the user
3 Failed.
No response from user: the text was displayed, and the
user did not react. It corresponds to ‘12’ No response
from user
4 Failed.
Screen is busy: the text could not be displayed
Description
0 Response type shall be digits (0-9, *, # and +)
1 Response type shall be SMS default alphabet
3 Response type shall be “Yes/No” response
Description
String type Field of 1 to 2 bytes length in string type format
between “”. Coding is defined in .
Length shall be 2 bytes when coding is UCS2 .
Otherwise it shall be 1 byte