Sony Ericsson GM47 - Manual (Page 268)

GM47/GM48 INTEGRATOR’S MANUAL
268
LZT 123 7263 R1C
Example
Display cell broadcast messages:
AT+CNMI=3,0,2,0,0
15.11 AT+CMGR Read Message
PDU Mode
Returns message with location value from preferred message
storage to the TE. Status of the message and entire message
data unit is returned. If status of the message is ‘received
unread’, status in the storage changes to ‘received read’. If reading fails,
final result code +CMS ERROR: is returned.
Description Command Possible Responses
Read
message
AT+CMGR= • +CMGR: ,[],]
• +CMS ERROR:
• OK
• ERROR
Show if the
command is
supported
AT+CMGR=? • OK
• ERROR
Description
0 Received unread message (i.e. new message)
1 Received read message
2 Stored unsent message (only applicable to SMs)
3 Stored sent message (only applicable to SMs)
Description
Integer type Value in the range of location numbers supported by the
associated memory
Description
String type Manufacturing specific. Should be left empty but not
omitted
Description
Integer type Value indicating in PDU mode (+CMGF=0), the length of
the actual TP data unit in octets (i.e. the RP layer SMSC
address octets are not counted in the length)