Sony Ericsson GM47 - Manual (Page 264)

GM47/GM48 INTEGRATOR’S MANUAL
264
LZT 123 7263 R1C
15.10 AT+CNMI New Message Indications to TE
PDU Mode
Selects the procedure for the way in which new messages received from
the network, are indicated to the TE when it is active, e.g. DTR signal
is ON. If the TE is inactive (DTR signal is OFF), message receiving is
carried out as specified in GSM 03.38 (3G TS 23.038).
Description
String type GSM 03.40 TP-Destination-Address Value in string format;
BCD numbers (or GSM default alphabet characters) are
converted to characters of the currently selected TE
character (refer command +CSCS). Type of address given
by
Description
String type GSM 04.11 TP-Destination- Address Type-of-Address octet
in integer format (when first character of is +(IRA 43)
default is 145, otherwise default is 129
Description
Integer type GSM 03.40 TP-Message-Reference in integer format
Description
String type GSM 03.40 TP-Service-Centre-Time-Stamp in time-string
format (refer to
Description Command Possible Responses
Set new message
indication to TE
AT+CNMI=[
[,[,[,
]]]]
• +CMS ERROR:
• OK
• ERROR
Show the current
setting
AT+CNMI? • +CNMI:
,,,
• OK
• ERROR
Show if the
command is
supported
AT+CNMI=? • +CNMI:
(list of supported s),
(list of supported s),
(list of supported s),
(list of supported s)
• OK
• ERROR