Phonebook, 1 at*e2pbcs ericsson m2m phonebook check sum, 2 at*esag ericsson add to group – Sony Ericsson GM47 User Manual
Page 235: 1 at*e2pbcs, Ericsson m2m phonebook check sum, 2 at*esag, Ericsson add to group

235
LZT 123 7263 R1C
14. Phonebook
14.1 AT*E2PBCS Ericsson M2M Phonebook Check Sum
Command causes the ME to return the phone book checksum
stored internally . Phone book checksum is recalculated whenever there
is a change in the phone book. By requesting the checksum, the external
application can detect if the phone book in the ME has changed, without
downloading the whole phone book.
During the SIM initialisation process, it takes some time to download
the phone book from the SIM card to the ME, depending on the number
of entries. In case the command is invoked before the checksum has
been calculated, the ME gives an ERROR message.
14.2 AT*ESAG
Ericsson Add to Group
This command adds a contact or a phone number to the current group.
Description
Command
Possible Responses
Request phone book
checksum
AT*E2PBCS
• *E2PBCS:
• +CME ERROR:
Show if the command
is supported
AT*E2PBCS=?
• OK
• ERROR
Description
Hex type
1 byte in hexadecimal (between “”), containing the
checksum
Description
Command
Possible Responses
Adds a new item to the
group with
AT*ESAG=
• +CME ERROR:
• OK
• ERROR
Show if the command
is supported
AT*ESAG=?
• *ESAG: (list of
supported
supported
• OK
• ERROR