Sony Ericsson GM47 - Manual (Page 129)

129
LZT 123 7263 R1C
4. Audio
Note! *E2EAMS and *E2APR are new commands that replace the
funtionality offered by the *EALR, *EAMS, *EARS and *ELAM
commands. Use the new commands in new applications. The old
commands are included for compatibility.
4.1 AT*E2EAMS Ericsson M2M Audio Profile Modification
This command allows the modification and configuration of the current
audio profile. An audio profile is a set of data which uniquely defines
the way in which the audio paths, gains, DSP algorithms and switch
setting are configured. There are several audio profiles available in
non-volatile storage, and the current profile can be modified by use of
the AT*E2APR command.
The AT*E2EAMS command allows the user to:
Description Command Possible Responses
Request
operation
with audio
profile
AT*E2EAMS= [,,
,,
,,
,,
,,
,,
,,
,,
,,
,,
,][,]]
• ERROR
• OK
Show the
current
setting
AT*E2EAMS? • *E2EAMS: ,
,
,
,
,
,,
,
,,
,,
,
,
,
,
,,
,
OK
• ERROR
Show if the
command
is supported
AT*E2EAMS=? • *E2EAMS:
(list of supported s)
• ERROR