Sony Ericsson GM47 - Manual (Page 108)

GM47/GM48 INTEGRATOR’S MANUAL
108
LZT 123 7263 R1C
Examples
AT*ECAM?
*ECAM: 0
AT*ECAM=1
OK
3.12 AT*EDST Ericsson Daylight Saving Time
This command sets the daylight saving time hours.
Description
Integer Exit cause according to GSM 04.08 reported when
returning to Idle state ( = 0)
Description
String String type phone number of format specified by .
Only valid for = 1 (Calling)
Description
Type of address octet in integer format (refer to GSM
04.08, subclause 10.5.4.7)
129 ISDN/Telephony numbering plan, national/international
unknown. Default if no “+” in sca
145 ISDN/Telephony numbering plan, international number.
Default if “+” in sca.
161 ISDN/Telephony numbering plan, national number
128 to 255 Other values refer to GSM 04.08 section 10.5.4.7. Only valid
for = 1 (Calling)
Description Command Possible Responses
Set Daylight Saving
Time
AT*EDST= • +CME ERROR:
• OK
• ERROR
Show the current
setting
AT*EDST? • *EDST:
• +CME ERROR:
• OK
• ERROR
Show if the command
is supported
AT*EDST=? • *EDST: (list of
supported s)
• +CME ERROR:
• OK
• ERROR